Pixprocessing_Mining is a cutting-edge software solution based on photogrammetry and computer vision for the 3D object reconstruction and detailed object analysis.

Developed focusing on the major challenges of the Mining industry, it possesses a wide range of features that speed up and facilitate your daily work as well as provides essential information for effective business management.

COMPREHENSIVE 3D MODELS

Highly Detailed 3D Terrains

The object visualization in a 3D mode has never been so easy – no matter the size of the object, enjoy the navigation through different dimensions without losing even a smallest detail. Large data visualization engine enables you to zoom in, zoom out, drag the visualizing zone from one object to another, without losing a speed or visualizing quality.

FULL-SCALE OBJECT RECONSTRUCTION MANAGEMENT

Photo Manager

Wide range of photo management options enables the user to process the photos acquired by any photo-camera. With Photo Manager, one also can easily review, select or deselected the specific photos for further data processing.

Sparse point cloud reconstruction

Sparse point clouds are often intended to represent the external surface of an object. For the best user experience, we offer 3 reconstruction levels: Low, Medium, High.

Dense Point Cloud generation

Dense point clouds are the key elements in creating a 3D mesh from the original 2D footage. Denser 3D point clouds result in better visualization and positioning, though may require more powerful machines and consume more time.

DEM

Digital elevation model (DEM) provides detailed terrain information. This layer is useful for 2D/3D measurement step.

Georeferencing

Though most up-to-date UAVs have on-board cameras to obtain the geotagged images, some professional projects need high-end accuracy. In such case, one can add GCPs from his/her RTK GPS device.

Convenient GCP Manager

GCP (Ground Control Points) are used to lock your object data into the local coordinate system. It also plays an essential role in comparing the same object in different time lapse. Save time and simplify the comparison process by easily setting the initial GCPs and memorizing it for the future projects.

ACCURACY

True Orthophoto

Accurate True Orthophoto

This is an indispensable tool when precise measurements of distances are required. It gives you an accurate map in every angle and ratio, and is one of the most cost-effective and accurate mapping tools.

CONVENIENCE AND SIMPLICITY

Customizable Workflow

Customizable Workflow

Save time and adjust the workflow according to your needs. Select the needed process steps by clicking the checkmark and let the software do the entire workflow without your intervention. Amend and customize it as many times as you want.

ADVANCED VISUALIZATION TOOLS

Highlighting Options

Wide Variety of Object Highlighting Options

Make your reports more expressive by highlighting elements that you need. Use different colours, bald option, different element format to accentuate its importance. Moreover, you can select the separate objects/elements to point out, no matter if it is in a set or drawn separately.

Interactive Histogram

It is a great tool to showcase the height variation of the object. You can easily variate:

Colour ramp pallete     /     Colour change scale     /     Texture options

Shadowing option is a crucial feature when dealing with converging objects as it quickly accentuates the surface irregularities.

Min and max height value selection of the histogram enables a better visualization of the object elements in the selected height level.

Hole Filling Options

Hole-Filling Variety

Hole-filling is very important when dealing with initial 3D model preparation for further object analysis and various simulations. There are 3 hole-filling options:

  • Initial (internal). Generated automatically at the 3D object creation phase. It completes all possible inconsistencies due to fluctuations in the scanned data.
  • External. Usually performed by the program user and consists of selecting the necessary “holes” to be filled in.  Essential in project preparation for further analysis
  • Smart. Also performed by the program user, and is usually used for further object analysis, measurements and various simulations.

Flattening

Create neat 3D models by excluding unnecessary information. Eliminate unnecessary objects using the flattening option:

  • Averaging – selected object is eliminated by bringing the average of the surface on which it stands.
  • Flattening to the minimum point – this alternative allows you to delete everything that is up to the lowest point of the selected object.

Bounding Box

A bounding box appears around selected object in a non-Wireframe viewport. It enables viewing and management of the selected area / element / part of the 3D model without unnecessary data.

COMPREHENSIVE CONTOUR-LINE MANAGEMENT

Contour-Line Drawing

Advanced Contour-Line Drawing

Wide range of options for operating with the contour lines. You can select whether to draw:

– A set of contour lines by defining the necessary spacing between the lines;

– Each contour line separately without a need to submit spaces between different lines.

Contour-Line Management

Advanced Contour-Line Management

Draw a separate contour line to showcase the needed level. It is a very useful feature providing visibility of the specific element level.

Easily drag it up and down, till you find the suitable height. Add new contour lines one by one. Highlight only those that you need. Measure the distance between the selected contour-lines.

TAILORED MEASUREMENTS AND ANALYSIS TOOLS

.

Profile_And_Draped Line

2D & 3D Measurements

Get the precise measurements and analyze the object by using:

Point   /   Line (distance)   /   Profile (distance, altitude, angle)
Polygon (slope, volume, perimeter)
Surfaces – the 2D & 3D  perimeter and 2D  & 3D area, 3D volume, height and base area.

Draped Line

Get the precise measurements of the stockpile crest by using a draped line option.

Smart Polygon and Layer Management

Save time and calculate the needed volume of the object by selecting one of many layer options provided by the software.

Take advantage of Smart Polygon selection by indicating only a few points of the desired area selection. The program will make a precise selection by itself.

Object Comprasion in Time Lapse

Object Comparison in Time Lapse

This feature allows you to monitor the object changes in time, and get the valuable information for effective resource and workflow planning. It also enables you to prevent potential disasters and this way to increase the work safety on the object. Use this feature to detect the fraud cases in daily routine.

OUTCOME VARIETY

Reporting_

Reporting

Create as many different reports as you want. Provide your own comments by adding personal annotations. Brand it with your credentials and submit this document to your colleagues, partners or clients. Select from a wide range of the elements available for reporting:

Sparse point cloud   /   Dense point cloud   /   DEM   /   Contour lines   /   True orthophoto    /   Separate measurements   /    etc.

Wide Export Variety

Numerous import and export formats make data managing and transition easy and flexible. Select:

The export format:
DXF / LAS / LAZ / PLY / OBJ / TIFF / STL / XYZ / PXG / CSV / TXT / SHP.

The project stage to export:
Sparse Point Cloud   /   Dense Point Cloud   /   DEM   /   True Orthophoto   /   Contour Lines   /  Full Project